White modular 3D-printed moss pole filled with sphagnum moss, supporting a climbing neon pothos in a white self-watering planter with clear reservoir. Green plant tie and top drip cup shown in a warm, softly lit indoor setting.

Modularer Moosstab für Kletterpflanzen mit Tropfschale – selbstbewässernd & schraubbar zur Pflanzenstütze

Starter Kit - 1 Ext / Schwarz
217,00 DKK
Zu Produktinformationen springen
White modular 3D-printed moss pole filled with sphagnum moss, supporting a climbing neon pothos in a white self-watering planter with clear reservoir. Green plant tie and top drip cup shown in a warm, softly lit indoor setting.
  • White modular 3D-printed moss pole filled with sphagnum moss, supporting a climbing neon pothos in a white self-watering planter with clear reservoir. Green plant tie and top drip cup shown in a warm, softly lit indoor setting.
  • Modular Moss Pole with Drip Cup for Climbing Plants - Self-Watering Plant Support
  • Two-step installation guide for a white modular moss pole base: the perforated anchor and cotton wick positioned inside an empty nursery pot, followed by potting mix added around the base while the threaded socket remains clear.
  • Close-up of one hand connecting a white teardrop-pattern moss pole extension to its anchored base. A half-turn arrow shows the quick threaded connection, which allows additional sections to be added as the climbing plant grows.
  • White watering can filling the top drip cup of a sphagnum-filled moss pole supporting a neon pothos. The guide explains that water slowly moistens the moss, then drains into the growing medium and self-watering reservoir below.
  • Measurements for the modular white moss pole system: 18 cm foot with 9 cm anchor, 6.5 cm-wide extension adding 20 cm, and 6.5 cm-wide dripper adding 10 cm. One extension creates an assembled height of about 48 cm.
  • Comparison of three white modular moss pole options: Starter Kit with foot, extension and dripper; Full Kit with foot, two extensions and dripper; and one extra extension. Assembled heights are approximately 48 cm and 68 cm.
  • Six available colours for the 3D-printed modular moss pole extension, each shown upright with teardrop ventilation openings: Black, White, Beige, Dark Green, Baby Pink and Terracota.
  • Three freestanding modular 3D-printed moss poles showing expandable heights: white Starter Kit with one extension, beige setup with two extensions and black setup with three extensions, each featuring a drip cup and anchored base.
  • Pink self-watering planter with clear reservoir holding a mature variegated plant, displayed beside its white ventilated inner pot and clear aroid pot. Compatible with the moss pole anchor in planter sizes 12 cm or larger.
  • Variegata Nordica customer information: handmade plant accessories dispatched from Denmark within three working days, 30-day refund promise, and prepaid taxes and duties for the UK, Norway and Switzerland. Instagram @variegata_nordica.
Modularer Moosstab für Kletterpflanzen mit Tropfschale – selbstbewässernd & schraubbar zur Pflanzenstütze

Modularer Moosstab für Kletterpflanzen mit Tropfschale – selbstbewässernd & schraubbar zur Pflanzenstütze

217,00 DKK
Kostenloser Versand ab 100 €
Nachhaltige Materialien
Einfache 30-Tage-Rückgabe

Vom Züchter entworfen. Für tropische Pflanzen entwickelt.

Wurzelfäule? Langsames Wachstum? Damit ist jetzt Schluss. 🛑🌿

Entstanden aus meiner Erfahrung mit hunderten Pflanzen. Diese Töpfe nehmen Ihnen die Arbeit ab: Sie automatisieren Belüftung und Bewässerung, damit Sie Ihre Pflanzen einfach genießen können.
  • 5 stars: 1 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
S
Sarah ROUX

Des accessoires très bien pensés pour nos plantes !

Merci beaucoup Sarah ! 😊
Ravis que les tuteur plaise à vos plantes. Bon jardinage et à très bientôt ! 🌱✨

Verwandte Produkte